Easy Peanut Brittle Recipe (2024)

Published on | Updated on by Melissa

This post may contain affiliate links meaning if you buy from them, I will make a few pennies, at no cost to you. See disclosurehere.

This easy peanut brittle recipe is golden, buttery, and perfect as a treat or to package up for holiday gifts. This homemade candy is salty and sweet and only has six ingredients!

Easy Peanut Brittle Recipe (1)

How to make Peanut Brittle

Homemade candy is a favorite during the holiday season – hard candy, crockpot peanut clusters, peanut butter fudge, and this old fashioned peanut brittle recipe.

I loved Planters Peanut Bars when I was little but I don’t think they make them anymore. This peanut brittle is similar and so easy to make yourself!

You do need to use a candy thermometer but don’t let that intimidate you. You’ll be fine as long as you don’t get distracted (speaking from experience).

Easy Peanut Brittle Recipe (2)

Why you’ll love this Easy Homemade Peanut Brittle

Easy Recipe – Candy making doesn’t have to be intimidating, this one is a breeze! Even if this is your first time making candy, you’ll be fine.

Simple Ingredients – You only need a handful of ingredients, six to be exact, that you likely already have on hand.

Family Favorite – This candy recipe is great any time of year but makes a great holiday gift if you bag it up into treat bags to pass out.

Equipment you’ll need

  • Baking Sheet – Use a lipped baking sheet to keep the peanut brittle on the pan.
  • Candy Thermometer – Nothing fancy, you just need a basic one, but it is helpful to have a clip to hook to the pot.
  • Silicone Spatulas – I use these for everything in the kitchen.

Ingredients

Below is a list of the ingredients you’ll need to gather to make this recipe.Scroll all the way down for the full recipe card.

  • SUGAR – Granulated white sugar.
  • CORN SYRUP – Use light corn syrup. I use Karo syrup.
  • WATER
  • BUTTER – Unsalted butter, cubed.
  • BAKING SODA – The baking soda creates a chemical reaction causing little air bubbles to form. The candy becomes porous and brittle, making it easy to break into pieces.
  • PEANUTS – I like to use roasted peanuts for flavor but raw spanish peanuts were traditionally used.
Easy Peanut Brittle Recipe (3)

How to make peanut brittle

This brittle candy is so easy to make, but it does require you to watch the temperature so don’t get distracted!

  1. STEP ONE: Grab a large cookie sheet with sides (like a jelly roll pan) and cover it with foil. Spray with nonstick cooking spray and set aside.
  2. STEP TWO: Stir together the sugar, corn syrup, and water in a medium saucepan. Bring the mixture to a boil and continue to boil until the temperature reaches 340 degrees F. It should be golden brown after about 15 minutes.
  3. STEP THREE: Remove the pan from the heat and add butter and baking soda. It will bubble up (that’s the chemical reaction) so work quickly stirring with a silicone spatula until smooth.
  4. STEP FOUR: Pour in the peanuts and stir to evenly distribute. Quickly pour the peanut brittle mixture onto the lined baking pan and spread it evenly into a thin layer.
  5. STEP FIVE: Let the candy harden, at room temperature (about 30 minutes), and then break into pieces and store in an airtight container.
Easy Peanut Brittle Recipe (4)

Which types of nuts should I use?

Peanuts are the classic choice to use in nut brittle. Roasted peanuts have great flavor. Raw Spanish peanuts were traditionally used but either work. You could also use almonds, cashews, macadamia nuts, pecans…just about any will work.

What does baking soda do to peanut brittle?

Baking soda might seem like an odd addition to the peanut brittle and not everyone adds it, but baking soda creates a chemical reaction that creates little air bubbles. It is added once the sugar mixture has cooked down and becomes acidic. The candy becomes porous and brittle, making it easy to break into smaller pieces.

Easy Peanut Brittle Recipe (6)

Why is my peanut brittle chewy?

There is where the candy thermometer becomes important. The biggest reason your peanut brittle is chewy and sticky is because you didn’t cook it long enough. It’s not something you can guess at, you need it to reach the hard crack stage. that means the strands of sugar break easily and feel dry, as opposed to sticky.

If you take it off the heat too soon, it doesn’t set up and makes a sticky mess, but let it cook too long and it becomes scorched and bitter.

Another possible cause might be humidity in the air.You should store finished peanut brittle in an airtight container so humidity doesn’t get to it.

Easy Peanut Brittle Recipe (7)

How long is it good for?

When stored in an airtight container, at room temperature, peanut brittle will keep for 6-8 weeks. Do not put it in the fridge as it as the moisture will cause the brittle to soften.

Itcan also be frozen and stored up to 3 months.

Need more homemade candy recipes? Try these:

Christmas Oreo Bon Bons
Grinch Christmas Cream Cheese MintsCrockpot Salted Caramel Fudge
Peanut Butter Balls
Crockpot Cinnamon Sugar Candied Almonds
Christmas “Crack”
Candied Pecans
Crockpot Candy

Click here to view my entire collection of candy recipes.

Easy Peanut Brittle Recipe (8)

Connect with Persnickety Plates!

Follow along on my social media so you never miss a post!

I made a fun group on Facebook for sharing recipes, asking questions, and talking about food. I’d love to have you! Request to join HERE.

Also, sign up to receive an email in your inbox for each new recipe:

FREE EMAIL SUBSCRIPTION & EBOOK

Easy Peanut Brittle Recipe (9)

Easy Peanut Brittle Recipe

Melissa Williams | Persnickety Plates

This easy peanut brittle recipe is golden, buttery, and perfect as a treat or to package up for holiday gifts. This homemade candy is salty and sweet and only has six ingredients!

4.77 from 17 votes

Print Recipe Pin Recipe Rate Recipe Save

Prep Time 5 minutes mins

Cook Time 20 minutes mins

Harden Time 30 minutes mins

Total Time 55 minutes mins

Course Dessert, Snack

Cuisine American

Servings 10 servings

Calories 390 kcal

Ingredients

  • 2 cups granulated sugar
  • ½ cup light corn syrup
  • ½ cup water
  • 6 Tablespoons unsalted butter cubed
  • ½ teaspoon baking soda
  • 1 ½ cups roasted peanuts

Instructions

  • Line a lipped baking sheet with foil and spray with non-stick spray. Set aside.

  • To a medium saucepan, add the sugar, corn syrup, and water. Add in the candy thermometer to the pan making sure it touches the mixture but not the bottom of the pan. Bring the mixture to a boil over medium heat and then continue to boil until the mixture is golden brown and reaches 340 degrees. This should take about 15 minutes.

  • Remove the pan from the heat and quickly stir in the butter and baking soda until smooth. Then stir in the peanuts until evenly distributed.

  • Pour the mixture onto the prepared baking sheet and spread evenly with a silicone spoon, working quickly, as it will start to set.

  • Let harden at room temperature, about 30 minutes, and then break up into pieces.

Notes

Use a candy thermometer to make sure your sugar mixture reaches 340 degrees. Hook the thermometer to the side of the pan so it touches the mixture but not the bottom of the pan.

Store in an airtight container.

Nutrition

Serving: 1gCalories: 390kcalCarbohydrates: 57gProtein: 6gFat: 18gSaturated Fat: 6gCholesterol: 18mgSodium: 170mgPotassium: 170mgFiber: 2gSugar: 53gVitamin A: 210IUCalcium: 26mgIron: 1mg

Nutritional information is an estimate and provided to you as a courtesy. You should calculate the nutritional information with the actual ingredients used in your recipe using your preferred nutrition calculator.

Tried this recipe? Tag me!Mention @melissa_pplates or tag #persnicketyplates!

Sharing of this recipe is both encouraged and appreciated. Copying/pasting and/or screenshots of full recipes to any social media is strictly prohibited. Content and photographs are copyright protected.

Originally published December 13, 2020.

This recipe first appeared on Yellow Bliss Road.

Easy Peanut Brittle Recipe (2024)

FAQs

Why put baking soda in peanut brittle? ›

Baking soda is a key ingredient in peanut brittle. It's what aerates the candy, giving it a nice light crunch. Why didn't my homemade peanut brittle get hard? The main reason why peanut brittle doesn't get hard and have the crunch we expect is because the sugar was not cooked long enough.

Is peanut brittle good or bad for you? ›

Peanut brittle has one redeeming quality: peanuts. Outside of that single ingredient, peanut brittle is painfully unhealthy. It contains: sugar, corn syrup, and butter, all of which are unhealthy for your body in different ways.

Why do you put water in peanut brittle? ›

The water is there in the first place to help prevent sugar crystals. Steam from the boiling water washes down the sides of the covered pot as the sugar cooks and takes with it, down into the boiling sugar, any crystals that form or are thrown onto the sides of the pot.

Why doesn t peanut brittle harden? ›

Why didn't my homemade peanut brittle get hard? Same answer as the question above. If your peanut brittle is not hardening, it's because the sugar mixture did not get hot enough to properly caramelize, cool and become hard, crisp and crunchy.

Why do people put co*ke in peanuts? ›

History. The combination is believed to have developed in the South during the 1920s, as a snack for blue-collar workers that did not require them to wash their hands. It quickly became popular as a summer snack, especially in rural areas. The snack became an internet trend in 2018.

How do you keep peanut brittle crispy? ›

#1 - Store in an airtight container

It should come as no surprise that storing your peanut brittle in airtight containers is one of the best ways to store peanut brittle. Keeping air out helps maintain your brittle's freshness by minimizing the amount of moisture that might come into contact with your sweet treat.

Why is my homemade peanut brittle chewy? ›

Why did my peanut brittle turn out chewy? The likely cause is that the sugar mixture didn't reach the proper hard crack stage temperature. Ensuring it reaches 300˚F is key to getting that classic brittle texture.

Should homemade peanut brittle be refrigerated? ›

To store: Store peanut brittle (once it's completely cooled) in an airtight container at room temperature. Do not refrigerate as the moisture from the fridge will cause the brittle to soften. Store for 6-8 weeks. To freeze: Peanut brittle can be frozen and stored up to 3 months.

Will peanuts raise blood sugar? ›

Individuals with diabetes need foods that can help manage blood sugar and weight. Peanuts and peanut butter can be a powerful ally to reaching success. Peanuts and peanut butter have a low glycemic index, which means they don't cause blood sugar to rise sharply.

Why is my peanut brittle bitter? ›

Those other liquid sugars have impurities that will burn at the higher temperature of making caramel, leading to a bitter-tasting brittle.

What can I use instead of corn syrup? ›

The best corn syrup substitutes for baking are brown rice syrup, maple syrup, agave, tapioca syrup, honey, golden syrup, and black treacle. Whether you're avoiding using corn syrup, are allergic to corn, or don't have it on hand, there are a ton of substitutes for corn syrup to try instead.

Why does my peanut brittle have bubbles? ›

The secret is in the baking soda. As the sugar is cooking and begins turning amber in color it accumulates small amounts of acid, and that acid reacts chemically with the alkaline baking soda releasing about a zillion minuscule bubbles of CO2 that get trapped, making the sugar porous and, well… brittle.

Why is baking soda added to peanut brittle? ›

Baking soda also raises the pH of the mixture, promoting the Maillard reaction and giving the brittle its particular color and flavor profile.

Why did my peanut brittle not turn brown? ›

If your peanut brittle reached 311°F but is a pale milky color, it's likely the candy cooked too quickly. It reached the correct temperature but didn't cook long enough to undergo sufficient Maillard reactions and develop the characteristic brown color and rich, roasted flavor. Next time, cook at a lower temperature.

Why is my peanut brittle grainy? ›

What's important to know is that the corn syrup controls the grain of the brittle so adding too little and you have a grainy textured brittle, while adding too much will result in a stringy and sticky brittle. To start this Peanut Brittle, the water, corn syrup, sugar, raw peanuts, and salt are brought to a boil.

What is the purpose of baking soda in candy making? ›

Brittles and toffees accumulate small amounts of acid from the browning reactions that occur during cooking. This is one reason why the baking soda is added at the end of cooking. The soda reacts with the acid to make bubbles, and the syrup foams.

What is the interfering agent in peanut brittle? ›

Examples of interfering agents include corn syrup and cream of tartar. A key step in making brittle is heating the syrup to the proper temperature.

What is the purpose of adding baking soda and calamansi juice during peanut brittle processing? ›

When baking soda is added, it reacts with the acid and releases bubbles of carbon dioxide. This makes the syrup foam and expand so the finished candy is not so hard and dense. To retain the bubbles, the syrup should not be stirred too much after adding the baking soda.

References

Top Articles
Latest Posts
Article information

Author: Carmelo Roob

Last Updated:

Views: 6085

Rating: 4.4 / 5 (45 voted)

Reviews: 92% of readers found this page helpful

Author information

Name: Carmelo Roob

Birthday: 1995-01-09

Address: Apt. 915 481 Sipes Cliff, New Gonzalobury, CO 80176

Phone: +6773780339780

Job: Sales Executive

Hobby: Gaming, Jogging, Rugby, Video gaming, Handball, Ice skating, Web surfing

Introduction: My name is Carmelo Roob, I am a modern, handsome, delightful, comfortable, attractive, vast, good person who loves writing and wants to share my knowledge and understanding with you.